Automate AM2 Instalační příručka

© 2003 Directed Electronics, Inc. Vista, CAN416A 9-03Model AM2Installation GuideNOTE: This product is intended for installation by a professional inst

4. Release. The integrated LED/Valet®switch can now be released.For example, to program the locking (arming) mode from active to passive, within 10 se

System Features Menus* is Channel 1 and is Channel 2.Feature DescriptionsThe features of the system are described below. Features that have addition

5 ACTIVE/PASSIVE LOCKING (ARMING): If passive locking (arming) is selected in Feature 1,then the system can be programmed to either lock the doors whe

1.KKeeyy..Turn the key to the ON position.2.CChhoooossee..Within 10 seconds, press and release the integrated LED/Valet®switch the number of times cor

14©2003 Directed Electronics, Inc.CChhaannnneell ##99::If any button from a known transmitter is programmed to Channel 9, aalllltransmitterswill be e

©2003 Directed Electronics, Inc.15Single Button Lock (Arm)/Unlock (Disarm) ConfigurationWhen programmed for single button lock (arm)/unlock (disarm) c

16©2003 Directed Electronics, Inc.The dealer default settings only affect the settings listed above. The remaining features controloutputs of the syst

3-Pin 2-Wire DoorLock Harness998T Bitwriter®™Antenna—Do Not Cut!Refer to document 1041for installation techniques®Wiring Quick Reference Guide©2003 Di

©2003 Directed Electronics, Inc.18

Bitwriter®, Code Hopping®, Doubleguard®, ESP®, FailSafe®, Ghost Switch®, Learn RoutineTM, Nite-Lite®, Nuisance Prevention®Circuitry, NPC®, Revenger®,

©2003 Directed Electronics, Inc.3Table of ContentsPrimary Harness (H1) Wire Connection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4©2003 Directed Electronics, Inc.Primary Harness (H1) Wire Connection GuidePrimary Harness (H1) Wiring DiagramThe primary harness supplied with this u

©2003 Directed Electronics, Inc.5H1/2 WHITE (-) Parking Light OutputThis wire provides a (-) 200mA output to flash the parking lights. This is suitabl

6©2003 Directed Electronics, Inc.H1/6 BLUE (-) 200 mA Second Unlock OutputThe H1/6 BLUE output is used for progressive unlock. A progressive unlock sy

©2003 Directed Electronics, Inc.7H1/11 RED (+)12V constant power inputBefore connecting this wire, remove the supplied fuse. Connect to the battery po

8©2003 Directed Electronics, Inc.Door Lock Harness (H4),Wire Connection Guide_________NOTE: For detailed instructions about connecting to the vehicle’

©2003 Directed Electronics, Inc.9Programmer Interface, 3-Pin PortThe BLACK three-pin port is provided for programming of the unit. When using the 998T